profile contact us
KBS Coating KBS Fir-A-Flex KBS Foamcoat C11 KBS Mortar Seal KBS Panel Seal KBS Pipe Seal KBS Pipe Seal C KBS Pipe Wrap KBS Sealant KBS Sealbags KBS Woodcoat Steel Fireproofing Albi DriClad Albi Clad TF Albi Clad 800
Extinguishing Agents Cease Fire Products
KBS Cease Fire KBS Coating KBS Extingushing Agents KBS Fir-A-Flex KBS Foamcoat C11 KBS Mortar Seal KBS Panel Seal KBS Pipe Seal KBS Pipe Seal C KBS Pipe Wrap KBS Sealant KBS Sealbags Albi DriClad Albi Clad TF Albi Clad 800
KBS: Operating in the following regions: Australia / NZ / Asia / Middle East / North America

KBS Fire Stopping Mortar Seals

Refer to our downloads page for complete technical information.

KBS fireproofing Mortar Seal - Protecting switchgear

KBS Fire stopping Mortar Seal is a dry mortar mix with a controlled swelling effect, which provides a non-shrinking, homogenous and smoke gas-tight fire seal for cable penetrations. Most mortars shrink during drying or curing. KBS fireproofing Mortar Seal expands while it sets (up to 3%), ensuring a tight and crack-free seal. When mixed to pumping consistency, KBS Mortar Seal will not run or sag, allowing easy build-up of material inside a wall opening. For smaller openings, shuttering is only necessary on one side.

NEW
KBS Fireproofing Mortar Seal Application Video
(Windows Media Video- File size: 3.6MB)
See demonstration video »

KBS fireproofing Mortar Seal has been rated up to 240 minutes fire stopping capabilities at various thicknesses as per all important standards including FM and Underwriters Laboratory (UL). (See list of international test results and approvals in our E Brochure.)

Mortar Seal before oil protection is applied Mortar Seal after oil protection is applied

KBS fireproofing Mortar Seal is a blend of inorganic binders, fillers and lightweight aggregates, interlaced with special additives and agents.

clean mortar

KBS firestopping mortar seals may be used wherever a fire resistance of up to 240 minutes for cable penetrations is specified. KBS Mortar Seal is preferably used for floor penetrations but, because of its non-sagging properties, is also easily installed in wall penetrations.


KBS Mortal Seal Video Demonstration

Sydney
PO Box 1502
Crows Nest
NSW 1585
Australia
Ph: +612 9969 7100
Fax: +612 9969 7200
Vancouver
PO Box 21096
Coquitlam BC V3E 3P9
Canada
Ph: +604 941 1001
Fax: +604 941 1029